The Composi-Tight 3D™ Sectional Matrix System with Slick Bands™ is designed to create tight, anatomically accurate contacts on Class II restorations. The pre-contoured non-stick Slick Bands recreate the proper tooth anatomy without sticking to the composite while two styles of rings create the required tooth separation and band adaptation for a tight, natural contact.

Soft Face™ 3D-Ring

The orange Soft Face™ 3D-Ring will be the ring used in most circumstances because of its ease of placement and its ability to adapt to a wide variety of tooth anatomies while reducing flash and restoring proper contour.

Thin Tine G-Ring®

The thin tine G-Ring® (gray) is utilized in certain conditions where the shape of the dentition will not allow the contoured shape of the Soft Face™ 3D-Ring (orange) to grip tightly around the tooth, such as the distal of a canine. In this condition, the burnished ends of the thin tine G-Ring® will adapt and retain more effectively. The thin tine G-Ring® may also be preferred for malpositioned or pedodontic applications.

SLICK BANDS™

Slick Bands are the first matrices to virtually eliminate the problem of difficult to remove matrix bands. Modern bonding agents do a fantastic job of bonding resins to tooth structure. Unfortunately, they also do a good job of bonding the matrix band to the restoration. Slick Bands', with a micro-thin coating bonded to dead soft stainless steel, virtually eliminate this problem. With a 92% average reduction in adhesion, they're a breeze to remove. As an added bonus, the different colors make ordering easier too!

	FLASH IS GONE! Three-dimensionally contoured tips with Soft Face™ adaptable silicone hug the matrix band to the tooth. Flash is virtually eliminated, greatly reducing finishing time. No other sectional system has Soft Face™ tines.
	MAXIMUM SEPARATION A firm core in the center of each soft, adaptable tip directs the ring's tension interproximally where it is most effective for the separation of teeth.
	FAST AND EASY TO PLACE The slotted bottom fits directly over the wedge simplifying placement and allowing for wedge adjustment.
	EASY WIDE EMBRASURES The tips of the new Soft Face™ 3D-Ring are wider than standard separator rings allowing placement on wider embrasures.
	STRENGTH FOR THE LONG HAUL The reinforcing overmold enhances ring tension and longevity giving you maximum separation that lasts restoration after restoration. Both styles of 3D system rings are fully autoclavable.