NiTin™ Sectional Matrix Rings







The new cost-effective solution for tight contacts from Garrison!

As the name implies, the new NiTin™ sectional matrix system separator rings are made from a special formulation of NiTinol nickel titanium for super strength and resiliency. Rather than typical material used by other brands, NiTin™ is made with drawn-wire NiTinol which produces superior spring characteristics. Add in the PEEK reinforcement on the bow of the ring and you've got a system that produces exceptional contacts for hundreds and hundreds of uses.

Longevity by design

  • Drawn-wire nickel titanium for the ultimate in long life
  • Proprietary heat-set processing increases strength and resiliency
  • PEEK (polyether ether ketone) super-polymer reinforcement reduces ring stretch
  • Ultra-durable PEEK tips are the strongest, longest lasting polymer tips on any ring

Optimized geometry for adaptation and control

  • Precisely engineered tip geometry allows NiTin™ to grip where others pop-off--all while reducing flash
  • Smaller, less "bulky" design fits well in tight spots and is still stackable for MOD

Composi-Tight® 3D Fusion™ Matrix Rings






More than 20 years of sectional matrix leadership and an incredible amount of feedback from users all over the globe were poured into the design of the new Composi-Tight® 3D Fusion rings. All this hard work has resulted in separator rings with significantly improved performance and ease of use.

The two main separator rings, short (blue) and tall (orange), are the heart of the new Composi-Tight® 3D Fusion™ system. These are your “go-to” rings and will be used for the majority of restorations.

The world’s first Wide Preparation separator ring (green) makes Composi-Tight® 3D Fusion™ the most versatile and user-friendly sectional matrix system available. The Wide Prep ring greatly simplifies what until now has been one of the most challenging posterior composite restorations. Now you can restore these big preps with confidence knowing that you will achieve excellent contact and contour without having to take extra steps.

  • Get a grip –  All Composi-Tight® 3D Fusion™ separator rings incorporate Ultra-Grip™ retention extensions that anchor them securely to virtually any tooth. Fusion rings stay where you place them!
  • Stack it up – Tru-Stack™ technology allows placement of the orange ring (tall) over the blue ring (short) for easier MOD and multiple tooth restorations
  • Hugs the curves – Soft-Face™ silicone tips with enhanced marginal ridge anatomy hug the matrix band to the tooth for flash free restorations
  • It just keeps going – Enhanced durability for extended ring life and greater tooth separation

Check out the NEW & IMPROVED ring forceps here: Composi-Tight® 3D Fusion™ Ring Forceps

INFO: For more information on this system and its components, check out

Composi-Tight® 3D Fusion™ rings are packed with features that make the technique intuitive and frustration free!

Composi-Tight® Clear Matrix Rings

The Composi-Tight® 3D Clear separator ring is an improved version of the very popular Soft-Face™ 3D ring. Now clinicians can apply their curing light from both the buccal and lingual surfaces without interference from opaque separator rings.  This easily allows for proper curing of deeper proximal boxes and is also beneficial for clinicians bulk-filling Class II restorations.

It features the same tooth hugging soft silicone tip design that virtually eliminates buccal and lingual flash. The ring itself has been significantly reduced in size and is substantially more heat and chemically resistant resulting in longer ring life. These improvements have also made them easier to apply on larger molars.
View the NEW short and tall rings here: Composi-Tight 3D Fusion Rings

Composi-Tight® 3D XR Matrix Rings

View the NEW & IMPROVED short ring here: Composi-Tight 3D Fusion Rings
The popular blue 3D XR ring has taken all the benefits of the original orange 3D ring and built upon them. The tenacious grip, along with enhanced Soft Face™ technology and Dynamic Tip Angle™, makes the Composi-Tight® 3D XR ring the standard for all Class II restorative procedures.
Better! Tip design improves results on difficult dentition
Stronger!  Space-age PEEK® overmold promotes unparalleled strength and resistance to fatigue
Faster! Expanded indications allows for predictable placement – reducing procedure time

The 3D XR ring has a tenacious grip, along with enhanced Soft Face™ technology and a Dynamic Tip Angle™.

Composi-Tight® Original G-Rings® Matrix Rings





The Composi-Tight® Original G-Rings provide the required amount of tooth separation and hold the matrix bands securely in place while the restoration is performed. Made of 
polished stainless-steel, G-Rings can be autoclaved for repeated use. 
Hardened spring steel allows for easy placement with rubber dam forceps. G-Rings come in two tine lengths: Standard length is used for class II restorations; Long length allow overlay of rings for MOD or multiple tooth restorations. Burnished ends grip teeth at the gum line, keeping rings securely in place.
View the NEW short and tall rings here: Composi-Tight 3D Fusion Rings

Composi-Tight® Gold G-Rings® Matrix Rings

The Composi-Tight Gold® G-Rings were carefully designed using the input of doctors and improve the results of posterior composite restorations.

  • More resilient to retain strength and last longer
  • 2x stronger than our Original G-Rings, the Gold rings are stronger for outstanding separation
  • Made of polished stainless steel, can be autoclaved for repeated use
  • Patented burnished ends grip teeth at the gum line, keeping rings securely in place
  • Two tine lengths: standard length is used for most restorations, long length is used for larger molars
  • Allows for overlay of rings for MOD and multiple tooth restorations

View the NEW short and tall rings here: Composi-Tight 3D Fusion Rings

Composi-Tight® 3D Matrix Rings

See the NEW & IMPROVED tall ring here: Composi-Tight 3D Fusion Rings
Sectional matrix systems are unbeatable for predictable contacts on posterior composites, and the Composi-Tight® name brand sets the standard. Composi-Tight® 3D was the first Soft-Face™ member of that award winning family.  The Soft Face™ 3D Ring combined with the thin tine G-Ring® provide incredible flexibility.  Predictable, tight and anatomically accurate contacts can be produced faster and easier.

Soft Face™ 3D-Ring - used in most circumstances because of its ease of placement and its ability to adapt to a wide variety of tooth anatomies while reducing flash and restoring proper contour.
Thin Tine G-Ring® - can be utilized in certain conditions where the shape of the dentition will not allow the contoured shape of the Soft Face™ 3D Ring (orange) to grip tightly around the tooth, the burnished ends of the thin tine G-Ring® will adapt and retain more effectively.