Clone of Clone of Clone of Clone of Clone of SCOPRI PERCHE’ QUAD E’ VINCENTE!

Questa pagina di risorse ha lo scopo di rispondere alle domande più comuni sul Sistema Quad per aiutarvi a massimizzare l'efficienza e ottimizzare i risultati utilizzando il sistema.

Si prega di inviare i propri suggerimenti via e-mail a jmaglin@garrisondental.com.

Panoramica QUAD

Il sistema Quad Matrix è progettato per creare contatti stretti e anatomici sui restauri in composito di Classe II. È particolarmente efficace per i restauri complessi, multipli, compresi i restauri back-to-back, se abbinato alle Firm Bands.

Anello con punta “guida”

Gli anelli Quad hanno un design asimetrico, con una punta standard su un lato e una punta “guida” sull'altro. (La forma della punta guidar garantisce un adattamento preciso all'anatomia dei denti adiacenti per un restauro back-to-back, mantenendo al contempo una forte forza di separazione).

 

Anello con punta “guida”

Gli anelli Quad hanno un design asimetrico, con una punta standard su un lato e una punta “guida” sull'altro. (La forma della punta guidar garantisce un adattamento preciso all'anatomia dei denti adiacenti per un restauro back-to-back, mantenendo al contempo una forte forza di separazione).

 

What problem are we solving?

Dentists frequently experience band destabilization and displacement when performing MOD and back-to-back Class II composite restorations using conventional sectional matrix systems. This concept addresses three critical moments of the procedure: 

  1. During Wedge Insertion
    1. Matrix bands flare off the tooth before wedges are placed, allowing the wedge to catch the band and pull it off or mis-position it.
  2. During Ring Placement
    1. Placing the ring often displaces the band, causing loss of contact form, poor contour, or the need to restart the sectional matrix setup. 
  3. Need for Circumferential Matrix Band Solution
    1. When you need a 360-degree band, they often have handles or placement devices that inhibit or prohibit ring placement.  This matrix allows a circumferential solution that can be effective with rings.

When to Use It 

The Elastic Band Concept is intended for MOD Class II and back-to-back MOD Class II restorations. 

You will receive 5 parts of each of the 3 sizes, with each size packaged in its own labeled blister pack, for a total of 15 parts. All parts are made from our Fusion Firm sectional matrix band material. 

  1. Blister Pack Label: “175” 
    1. Description: Our most popular band size (height = 5.3 mm). If you have previously evaluated the Elastic Band Concept, this is the same size you evaluated during the initial field evaluation.
    2. Intended Use: Regular-sized molars.
  2. Blister Pack Label: “200”
    1. Description: This size is slightly taller than the 175 band (height = 6.1 mm).
    2. Intended Use: Tall molars or cases requiring additional band height.
  3. Blister Pack Label: “Premolar” 
    1. Description: This size has the same height as the 175 band (5.3 mm) but a reduced diameter to better fit premolars. 
    2. Intended Use: Premolars.